You will, however, need to obtain a few objects before you begin. To set your tennis ball on chair legs, you’ll need the following items.
- Tennis racquets
- A razor-sharp knife
- Gloves for the hands
Step 1 :Cut your tennis ball in half first.
To begin, you must first cut your tennis ball. You’ll need one tennis ball for each of the legs. I chop down each tennis ball with a sharp knife in most cases. Before cutting the tennis ball, make sure you’re wearing gloves.
Take a ball, however, and mark one side for cutting. Cut the tennis ball to the length of your chair legs now. Don’t cut anymore because it will become loose when you attach it to the legs.
Step 2: Place the cut tennis ball between the chair legs.
You’ve already trimmed down the tennis ball to maintain the proper measurement. However, apply pressure to the tennis ball’s cutting side using your finger. Then you’ll have a perfect spot for your tennis ball to rest on the chair legs.
Step 3: Relax in a quiet classroom.
To place a tennis ball on the chair legs, follow the above two instructions. You can use glue or other materials to keep the tennis ball from moving around once you’ve placed it on the legs (It is not mandatory).
Best way to put tennis balls on Walker
1. Collect all of the items you’ll require.
All of the necessary supplies must be on hand. Among these are razor-sharp box cutters.
- Tennis racket
- The tennis ball will be held in place by this object.
Now that you’ve gathered your resources, it’s time to get to work.
2. Place the ball in the appropriate spot.
We listed the materials you’ll need to put balls on a chair in step one. One of those materials is a substance that will keep the ball in place and prevent it from moving.
When you’re ready to cut, gently balance the ball on the vice to keep it from moving. If you’re used to it, you can use your hand to help stabilise the ball. If you’re a beginner, use the vice to keep the ball steady.If you don’t have access to a vice, have someone else hold the ball for you.The goal is to keep the ball from moving about while you cut it.
3. Identifying the beginning place.
You’ll see that we’ve included a hammer and a nail in the list of tools you’ll need to do the job. These materials are not required. It is a sharp box cutter that creates a hole that marks the start of the cutting process.
As a result, there are two methods for making a hole in a tennis ball. After that, pound the nail into the ball until you hear air leaking out. Two, you can use the sharp cutter to make the first hole, which will be the starting point for the actual cutting operation.
4. Using the knife, make an X on the ball.
From the hole you made, make an X with the knife. Make sure the X is at least two inches long. You are not, however, bound by the two-inch rule. On the tennis ball, follow the line that forms an x shape.
5. Place the ball on the leg of the walker.
Push the tennis ball on the walker’s leg once you’ve finished cutting and making the X on it. It’s a simple procedure. Open the flaps and put the walker’s legs inside the ball.
Why do people place tennis balls on their chairs?
Here are four reasons why it’s not such a horrible idea to put tennis balls on chairs. The amount of noise is lower. After conducting some research online, I discovered that the fundamental explanation is simple. When students slide their chairs around on the floor, it reduces noise.
If you’ve ever taken an exam in a school hall with chairs grinding on a wooden floor, using tennis balls to mute the noise seems like a good idea. Although these noises didn’t disturb me in school, if I were a teacher and had to hear them every day, I’m sure it would drive me insane!
It’s a lot easier to move the chairs around – Tennis balls on chairs “make it a little easier for smaller kids to slide them around when completing group work,” according to Stephen Fields of the Windsor-Essex Catholic District School Board.
Pupils’ concentration is improved -Students can concentrate better in class when the classroom is calmer, helping them to advance more swiftly in numerous areas.
The floor is protected – Finally, if a school has recently put a fresh new floor in a classroom or school hall, the last thing you want is for chairs and desks to scrape the surface. Tennis balls can help you avoid harming the floor and irritating the school governors!
Tennis balls on chairs aren’t the only option.
If the idea of cutting a bunch of tennis balls to connect to all the chair legs in a classroom makes you feel sick, there are several other options:
A carpet should install – Okay, so this isn’t the cheapest or most practical solution for most schools, but you can always install carpet. Not only will it reduce the sound of chairs sliding over the floor, but it will also improve the room’s acoustics by absorbing other noises and reducing echo. It’s also comfier, especially for younger children who prefer to sit on the floor while doing something.
Pads of Felt – It is a less expensive choice. Felt pads are small stickers with felt on one side that can place on the bottoms of chair legs. They’ll probably lose their stickiness with time, but they’re inexpensive and easy to replace.
Leg Tips Made of Rubber -Instead of tennis balls, rubber tips can attach to the ends of chair legs. These will dampen the sound of chairs sliding over the floor and protect the floor’s surface.